The NEW K40 RL100 Radar Detector with GPS Technology Technical Information and Unit Specifications:

Cutting-edge technology makes the RL100 the most advanced portable radar

         US Patents
         7,298,248 B2
         5,001,777
         RE39,038
         RE40,653
         RE41,905
         Other patents pending.

Detects every FCC and FDA approved police radar and laser -

Specifications
Operating Frequencies:	10.500 - 10.550 GHz (X band) 24.050 - 25.250 GHz (K band) 33.400 - 36.000 GHz (Ka band) 830 - 945 nanometers (Laser) 332 THz GHz = gigahertz THz = terahertz
Power Requirements:	11.0 - 16.0 Volts DC negative ground 170 mA typical standby
Dimensions:	4.625 in. L x 2.625 in. W x 1.1250 in. H
Weight:	6.0 oz.
Temperature Range:	5^oF to + 150^o F

Three filter settings -

Level / Mode	Sensitivity	Recommended Use
1. Highway (factory default setting)	Detects all types of FCC approved police radar or laser signals at full sensitivity.	For highway travel or in any area in which you are unfamiliar with the types of radar used.
2. City	The X-Band sensitivity is reduced. This is because it is the most common source of non-police radar signals. K, KA and Laser remain at full sensivity.	When traveling in an urban area with minimal non-police radar signals.
3. Filter	Eliminates X-Band detect- ion completely. Reduces K and KA Band sensitivity. Laser detection will re- main at full sensitivity.	When traveling in a con- gested traffic area with a high concentration of non-police radar signals.

Radar Receiver Type - DSP Datadyne Technologies

GPS Receiver Type - SiRFstar III

Display Type - Full LCD Text Display

Signal Strength Indicators - Audible geiger and numeric signal strength indications

RDD Guard

RL100 Brochure (PDF) >>
RL100 Owner’s Guide (PDF)>>